Page 1 of 1

Work in progress

PostPosted: Sat Dec 29, 2012 6:31 pm
by Al^
I just started to work on this room a couple a weeks ago, what I thought was gonna be easy turned out not so. Seems when they built it they nailed 1/2" plywood on the 2x6's first than put 1/4" layer of 4'x8' cork board, then on top that 1x2's spaced 2" apart than Arbourite glued to the 1x2's. So I ripped all arbourite and 1x2's off and gyproced over the cork. ceiling is all acoustic tile, so gonna leave that alone, under the tile is cork as well. I hope one day to get it finished and put my Diva's in it. The room is 33'3"w x 82'4"l, first ceiling is 10'3" and goes 16' to first glue lam beam than goes to 12'3"h with a glue lam every 13' after that. The beams add a nice look and help with reflections. So here's a pic, look's a mess, but as stated , a work in progress. cheers

Re: Work in progress

PostPosted: Sat Dec 29, 2012 6:36 pm
by Vansloneker
And right now it's all covered in snow...?

Re: Work in progress

PostPosted: Sun Dec 30, 2012 2:22 am
by Zardoz
Should be great when you finish.
Z

Re: Work in progress

PostPosted: Mon Dec 31, 2012 2:09 am
by Ralph
Wow - Massive job!
Huge area - "That's not a room - this is a room".

:idea: Are you going to call it "Al's Auditorium" ?

Re: Work in progress

PostPosted: Mon Dec 31, 2012 3:20 am
by artm
Al, are the Divas capable of driving the entire room??? Or, are you limiting them to a smaller area?

Re: Work in progress

PostPosted: Wed Jan 02, 2013 5:00 am
by Al^
They'll work like a charm, their planers :) Al