Hi There!
I have a lot of questions regarding the correct set-up of a pair of Fullrange.
This is the situation:
Signal is coming from Lyngdorf DPA-1 preamp.
In the Lyngdorf the signal is split electronically at 400 Hz with first order Butterworth.
Then the signal is going to two MX-D1 stereo amplifiers.
Vertical biamping -one for left, one for right.
Bass signal and MT is fed to the transformer Box.
Sound is ok but very bright.
I have turned down the MT down to -6db at the Lyngdorf.
So bass and MT do blend well. But the Tweeter is still very bright.
Now the situation with bass signnal feeding the ribbon directly:
Sound is much better (no adjustments to be made at the levels)
But the tweeter is still too bright.
I tried a setup where the tweeter is not connected at all ,-seemed almost best to me.
Any clue to this?
Thanks
